A ball of CDs. How to make a mirror ball

Disco ball- an integral part of any cool party. It will always be stylish and look very good at any holiday. In order not to spend a lot of money, we propose to make it with our own hands, from ordinary disks that are lying around in packs at home.

How to make a disco ball with your own hands from disks?

All we need for a disco ball is a few CDs, a foam ball shape, as well as glue and scissors.

1. We take unnecessary CDs and start cutting them into small pieces. It is best to make a square shape. It is better to take scissors stronger, since cutting discs is not an easy task.

We try to cut pieces of the same shape, small sizes. To make the discs cut better, they can be lowered into boiling water. Just do not keep them there for a long time, lowered and immediately pulled out.

Take care of your hands, a cut disc can be very sharp.

2. We take a foam ball. You can use any material, just this one came to hand. We will make a small hole in it with a skewer, you will need it to attach the ball to the ceiling.

3. Starting from the center of the ball - glue our square pieces of the disk. You can use regular glue or a glue gun.

The ball must be completely covered with disk elements. Then you need to install the mount, and the ball will be ready!

Many have seen bright and shiny mirror balls in discos and nightclubs. They scatter around the hall a lot of reflections from the small pieces of the mirror that cover the ball, and create an incredibly beautiful light music. Such disco balls are sold in lighting equipment stores, but you can also make a mirror ball with your own hands. It can be used as an interior decoration in high-tech apartments, for example. you can also hang such a ball in the child's room, and if you direct a beam of light at it, it will cast multi-colored reflections on the walls.

A homemade mirror ball can be made in any size, and simple materials and tools can be used to make it. As a basis for a mirror ball, you can use a ready-made foam ball or plastic, and if this is not found, then you can make a base ball from papier-mâché. It is necessary to stock up on a glass cutter, a mirror, a ruler, paste and newspapers. Ceiling tile adhesive can be used as an adhesive for gluing mirror pieces to the base.

The work on making a ball consists of two main stages: first they make a mirror mosaic, and then they make a papier-mâché base. Before you start making crafts, you need to decide on the diameter of the ball. The choice depends on the size of the room in which the ball will be installed, as well as on the availability of materials.

It should be remembered that when working with a mirror, when cutting it, small mirror chips are formed, so the floor must be covered with paper or newspapers. It is also better to cover furniture and other interior items. It is better to choose a thin mirror for a mosaic so that it is easier to cut it. Using a glass cutter, the mirror is cut into squares measuring 1x1 cm.

Globe mirror ball

Alternatively, you can make a mirror ball from an old globe.

First close up and putty all cracks and dents.
A loop of 1.5-2 mm is made from a strong wire (baked steel or copper) according to the same principle as on Christmas tree decorations. It is fixed on the ball with epoxy resin.
After the glue dries, the ball is painted with black or silver paint (preferably waterproof or nitro paint).
Then the surface of the base ball is covered with nitro-lacquer or alcohol-based varnish. Now you can start gluing pieces of the mirror.
If you cut the mirror into pieces with a glass cutter, they will turn out to be even, and if you wrap a piece of mirror in a cloth and break it into segments with a blow of a hammer, then they will be uneven. Such pieces can also be laid out in the form of a mosaic on the surface of the base ball. Glue them on glue like "Moment".
After the glue has dried, the ball is suspended from the ceiling and a beam of light is directed at it. You can use an ordinary handheld flashlight, but its power will not last long, so it is better to use a projector or filmoscope.

Disco is a fun, joyful and festive event for all people, not only for young people, but also for mature ones.

Many middle-aged men and women remember well the discotheques of their youth - invariably cheerful, noisy, with their favorite music. And, of course, absolutely indispensable for a disco under the ceiling. Many would like to return to the past for the holidays and have fun, as before. And there are many people who want to show the main entertainment of their youth to the younger generation. Only now the most important component - a disco ball - can now be found far from every club, and the organization ("disco of the eighties") will cost those who want to shake the old days quite expensive.

But in order to have fun with loved ones, it is not at all necessary to go to a club. You can arrange such a disco in your own home, and in the office, and at school (of course, during non-working and non-school hours). This requires volunteers, assistants and a little imagination.

In this article, those who want to return the past will learn how to make a disco ball with their own hands in a couple of hours from improvised materials. It's so easy that even a child can handle it.

So, for this craft you will need:

1. Mirror or old CDs.

3. Glass cutter.

5. Liquid nails.

6. Newspapers.

7. Balloon.

First of all, you need to inflate the balloon (it must turn out to be round) and tie it tightly so that it does not come down in any case.

After the preparatory activities, papier-mâché is made. There are two possible options here.

First, you can prepare a paste. To do this, bring water (five parts) to a boil and mix it with flour (one fourth) diluted in one part water. This mixture should boil for a couple of minutes and cool.

Secondly, you can do it easier and mix regular PVA glue with water.

The next step is cutting newspapers (or any other soft paper, but not magazines) into strips. They must be moistened, but not very strongly, in glue, then applied to an inflated balloon. An important caveat - it must be absolutely dry.

The number of layers of paper is not limited: the more there are, the stronger the disco ball.

Next, you need to wait until the papier-mâché dries. At this stage, you can pierce the ball and pull it out, but in this case it does not need to be tied with a fishing line - it should be fixed on a dried frame, and when pasting, you must leave a hole.

After that, you need to prepare the most important element - a mirror or disk (or you can combine them). The material must be cut into small - no more than a square centimeter - squares. This is done with a glass cutter. Here you need to be careful - the pieces of the mirror are very sharp, and therefore the work surface must be covered with a cloth.

And the last stage is gluing the squares on the surface of the ball and hanging it.

Having built such a decorative element, you can prove that a good party is possible at home, and no modern light music is needed for a disco!

We very rarely make crafts from cd discs, this is due to the fact that they are rather difficult and not universal material. It is difficult to come up with a master class with disks, and then successfully implement it, and even such that everyone would like it. But I still decided to create a small craft that many will be interested in and will need for the holidays to decorate their homes. I will tell you how to make a ball from cd disks with your own hands. The master class is not easy, so it is not suitable for children, mostly men do this, but sometimes women do it. Such a ball of disks can be hung on or next to it on a cornice; in a word, such a craft will certainly decorate your holiday and cheer you up.

Material for creating a ball of disks:

- CD discs.
- A drill with a very thin drill bit.
- Nippers.
- Glue gun.
— Wire.
- Rain (Christmas decoration).
— Marker.
- Paper template.

Here is everything we need, we have prepared.

We put a paper blank on the disk and mark each vertex with a marker on the disk.

We drill holes on the marks. Do everything evenly and clearly so that all the disks converge.

We connect the disks to each other with a wire, as on a homemade product. We wrap it tightly so that our ball does not fall apart later. First, we make two parts, each has one disk in the center and five more surround it.

We combine the two halves of the ball and also fasten them with wire.

When the main work with the disks is done, let's start decorating the ball. I chose the appropriate color of rain for each disc. Glue the rain onto the discs with a hot glue gun.

It looks very nice. First, we glue rain on the edge of the discs.

Arrange the colors so that they match with each other.

At the end, we decorate the middle of each disk, take a small piece of rain and paste it into the central hole. According to the color scheme, fantasize yourself, either the same color, or another for a change.

Here we have such an original, brilliant and beautiful ball, and even made with our own hands.

And if you want to take the kids with similar crafts, then teach them how to create. And also try yourself in business with new materials, for example, create or. Good luck sharing!

You can make a disco ball in the size you need. To do this, pick up a balloon made of dense rubber so that when inflated it has a round shape. Balls made of thin and soft rubber may not withstand the process of pasting papier-mâché and burst.

As a basis for a mirror ball, you can use a large plastic Christmas ball or a foam blank.

To create a reflective surface, you need a thin mirror and a plastic glass cutter. It is convenient to use the remnants of materials that have survived after the repair. If they are not available, use old CDs. They are easier to work with, but they will reflect light worse.

Making a disco ball

Inflate the balloon to the desired size. Tear the newspapers into small pieces and put them in one bowl, tear plain white paper into the second bowl. You can use the option with b / w and color newspaper. This is done so that when pasting, you can better see the alternation of layers, and the ball has a round, not oval shape.

Cover the table with plastic wrap. Lubricate the ball with Vaseline or other oily cream. Lay out its surface with paper strips with a slight overlap, smearing them with PVA glue. Apply a second layer of paper of a different color. Thus, make 5 or 6 layers and leave the ball to dry.

Instead of PVA glue, you can use wallpaper glue or cook starch or flour paste.

If you plan to paste over the ball with cut pieces of a mirror, then make 10 more paper layers. The base will become stronger, otherwise a heavy mirror can damage it. For mirror plastic or pieces of CDs, three more layers will suffice. When the papier-mâché is completely dry, pierce the balloon and take it out.

To cut the mirror into pieces, put it on the table and cut it with a glass cutter along the ruler, first into strips, and then into small squares. Cut CDs with scissors.

To prevent discs from cracking, heat the scissor blades over a candle flame or over a burner.

Pierce the papier-mâché ball through with a large needle with a thick line, bringing the needle out, pierce the ball again from the side of the pole. Tie both ends of the fishing line from above. This will be the mirror ball mount. Close up the hole left on top of the papier-mâché through which you pulled out the balloon and inserted the needle.

Use a hot glue gun or other clear glue to make a mirror surface on the ball. Place the prepared material, cut into pieces, in even rows on the ball tightly to each other. Start spreading on top. When the product is dry, you can hang it from the ceiling and, by directing a bright light on it, unwind it with your hands.

You can make a beautiful mirror ball for a party with your own hands from old disks.

You will need

Round balloon, old newspapers, PVA glue, needle, fishing line, glue brush, fat cream, old CDs, scissors.

Instruction

Tear newspapers into 2-3 cm pieces. Pour some water, add PVA glue and soak the pieces of paper.

Lubricate the ball with fat cream. Stick pieces of paper on the ball, lubricating with glue if necessary. As soon as the first layer dries a little, stick the second layer. Repeat several times.

When the paper balloon is completely dry, pierce the balloon with a needle and remove it through the hole at the tip.

Cut the discs with scissors into small squares. Pass the fishing line along the resulting ball.

Glue the ball over the disk pieces, starting from the middle. Try not to leave empty spaces. Leave the ball to dry well.

Hang a disco ball indoors, turn off the lights and point a flashlight or beam of light at it.

How did the mirror ball come about?

At the same time, everything “cosmic” came into fashion. Shiny fabrics from which clothes were sewn, slick interiors reminiscent of spaceships, unusual hairstyles and accessories. Glam rock artists spearheaded this fashion wave, their costumes often adorned with hundreds of tiny foil sequins. During concerts under spotlights, such clothes reflected thousands of sparks, creating a stunning effect.

The clubs where such concerts were held were also decorated in the appropriate style with a variety of mirror toys. The darkness of the hall and unexpected flashes made the audience feel like they were in space.

Over time, small mirror toys were transformed into mirror disco balls. They were hung in the center of the hall, directing light guns with small beam scattering coefficients at the ball. Light in such guns was focused using lenses. The ball itself was spinning with the help of a small electric motor, casting bright light reflections on the walls. Given the general space theme, this effect evoked associations with the rotation of the galaxy.

Glam rock had a direct influence on the formation of the Disco style.

This invention quickly gained popularity with the public. Mirror balls have graced most of the clubs and discos in no time. They fully corresponded to the era of the seventies - futuristic, cosmic, dreamy.

One of the founders of glam rock is the British singer and musician David Bowie.

The romance of lighting

In the Soviet Union, many high school students made such balls from globes and kaleidoscope parts. Now you can buy a disco ball anywhere for little money, unless, of course, there is a desire to recreate the unique light atmosphere of the seventies at home or in a club. Disco balls do not carry any payload, they are inefficient as the main source of illumination. This is just a way to diversify the surrounding space and cheer yourself and your guests up.

To buy a disco ball, you first need to decide on the power of the light source or light gun, and only then choose the ball itself. For small rooms, halogen lamps can be used as a light source. The diameter of the main light spot from the light source should be equal to the diameter of the mirror ball. This allows you to get the perfect amount of light reflections. You can work on matching the diameters by changing the distance between the ball and the light gun. However, it is worth considering that the source is best placed almost close to the ball. To create a more impressive effect, you can place several mirror balls in the hall.

home » Health » A ball of CDs. How to make a mirror ball