The correct length of women's trousers is slightly tapered at the bottom. The correct length of jeans: is it worth bothering

When you buy pants, you may have questions: do you need to adjust the length? What is the correct pants length? There is no single answer to these questions. It all depends on the style and style of the trousers, on your preferences. The secret is to find the optimal length.

3 PANT LENGTHS

In the English tradition, there are 3 options for the length of trousers: full break, half break, no break. Break, in this case, is a fold or crease in the trousers that forms above the boot at the front of the trousers. If you stand up to your full height, you can see this fold (or folds). The conservative English style suggests that the bottom edge of the trousers at the back should reach the heel of the boots, thus forming one fold above the boot (full break) in front. The Italians believe that the bottom of the trousers can barely touch the boot (no break). In front, respectively, there may not be a fold. The truth is often somewhere in the middle. So, the trousers of a slim fit suit will definitely be narrower at the bottom and will hardly cover the entire boot. However, if it is a business suit, you should take care that your socks are not visible when you are standing. This means you will need a half break - the length of the trousers to the middle of the back of the boot. 2 or more folds are considered bad manners in modern fashion. Better to make sure this doesn't happen to you.

WHAT LENGTH DO YOU NEED?

If you have classic non-narrowed trousers, then you can choose any of the 3 options. If the trousers are slim fit, choose half break or no break depending on the situations in which you will wear these trousers. It should be remembered that trousers with cuffs will look better with a short length. If you choose a short length, take care of the socks. In this case, socks become for you an additional space for the manifestation of style and creativity. Socks will be visible, which means they will attract additional attention, so you should make sure that they are in harmony with your image.

The topic of the length of trousers and jeans raises a large number of questions. And on the streets, I often see trousers or jeans that are too short for shoes. I must say right away that this post is only about the classic standard length, not shortened.

The correct length of trousers depends on their cut. And it is believed that the wider the trouser leg, the longer the trousers should be. So, for example, flares should practically touch the floor.

The flare almost covers the heel:

Straight-cut models should reach the middle of the heel, even if the shoes are low. On the right, the trousers are too short for this width, they must be either longer or Already in the leg.

If the trousers or jeans are narrower, which is most common now, then they can be shorter, because even if you want to pull the leg to the middle of the heel, it simply won’t fit over the shoes and will lie in folds on the ankle.

What if you have shoes with different heel heights?

How to properly fold jeans or chinos?

In some cases, a small lapel slightly balances the wide hips.

The wider the tucked part, the more the leg is visually shortened (in the next photo, an example of the backflip lapels). To wear jeans in this way, you need either a heel, or legs longer than the torso, or better just very long :) Well, in general, it rather attracts attention, so decide for yourself how much you need it.

You can also tuck those who are short, oddly enough, and if at the same time you also have a thin ankle, then this is your stylistic device.

Methods 2-4 are considered the most universal.

With this twist, you can also narrow wide jeans that have become unfashionable (not flared, just straight). Methods 2 and 3 are suitable for this.

Chinos are traditionally rolled up.

I switched to cropped trousers, even in late autumn I wear them with ankle boots. It's good that the weather and the car allow such liberties. And I really like rolled up jeans and chinos with my figure eight figure. And since even with my height, models are often too short and there is nothing left to do but tuck them in, the length problem is solved by itself.

Content Topics

Pants are an indispensable part of the men's wardrobe and should be in the closet of any member of the stronger sex. At the same time, every man knows how difficult it is sometimes to choose men's trousers of the right size, especially when they have to be bought without trying on, for example, when shopping online.

Today we will tell you how to correctly determine your size of men's trousers and accurately choose the model that suits you.

How to determine your pants size

If, as a rule, there are no problems with the Russian size, then when buying clothes from foreign manufacturers, most people get confused in incomprehensible markings. Most often, other digital or letter designations are used on clothes sewn by foreign companies.

Understanding them is quite easy. This can be done using the men's trouser size chart.

Table of men's pants sizes

In order to correctly determine the size of trousers for men using this table, you need to know your volumes or your Russian size. In this case, the first "landmark" is considered more accurate, since your size may have changed since the last purchase. In addition, it is possible that your parameters correspond, for example, to the reference size 50, and the manufacturer mistakenly sewed a label with the number 52 on your trousers.

That is why it is advisable to start any purchase with appropriate measurements. To purchase trousers, you need to know your waist and hips, as well as the length of the legs along the inseam.

You can find the parameters you need in two ways.

1. If you have an assistant, then ask him to measure the width of your waist, as well as your hips, in the area where the buttocks protrude the most. Then, using a centimeter tape, you need to measure the distance from the groin to the end of the intended leg. You will not be able to make these measurements yourself, since during the fitting you must stand straight. Also, when taking measurements, you should not pull in your stomach, bend over, bend your knees, etc.
2. In the event that there is no one to help you, you can do otherwise. Open your closet and choose pants that fit you well and fit in all respects. Lay them on a flat surface and measure the width of the belt, as well as the hips, that is, the place where the trousers "sit" on the buttocks. Multiply each number by two. Then also measure the length of the inseam of one of the legs. We do not multiply this indicator, but leave it in its “original” form.

Now you know all your parameters and can easily navigate in size tables.

At the same time, in no case do not forget that when buying, not only the size of the trousers is important, but also what height they are designed for. As a rule, the marking on them looks like this: 52/170, where the first indicator indicates the size, and the second indicates the height of the man. Russian height markings on trousers are set in increments of 4 centimeters. And you can also find out what size is right for you using the tables.

Size chart of classic men's trousers by height

When buying sweatpants, you can not use the men's trousers size chart, but determine it using the formula: waist circumference / 2 + 6. That is, if your waist is 97 cm, then, after rounding, it turns out that your size is 54. Looking at the table, you can see that this is the correct result.

However, this method of calculating sizes is only suitable when buying sweatpants that are attached with an elastic band and can forgive an error of 2-3 centimeters when determining the desired size marking.

How to buy trousers from foreign manufacturers?

Here you can also refer to the table above. However, when buying imported trousers, you may encounter a different size marking - W30L32.

Initially, this designation was used to determine the size of jeans. But over time, trouser manufacturers also began to use it. Here W is the size of the product, and L is the length of the pants along the inside seam.

In this situation, you can determine your size in two ways:

1. method: Convert your parameters from centimeters to inches by dividing the numbers by 2.54. This is how you get the right metrics. W is the circumference of the waist, and L is the length of the legs along the inside seam.
2. method: Check your data (in centimeters) with a special size chart for men's jeans.

Men's Jeans Size Chart

Height Size Chart

When determining your foreign size of men's trousers, keep in mind that size markings may depend not only on the country where they were sewn, but also on the manufacturer.

The problem is that many, especially small companies involved in the production of men's clothing (trousers, jeans, shorts ..) often deviate from the reference sizes in their lines.

Therefore, the surest way to buy the "right" trousers is to study the size charts of their direct manufacturer. Most often, such information can be found on the company's website or online stores, where its products are presented.

What should be the ideal trousers for men?

• Men's trousers should not tightly fit the buttocks, but at the same time, it is considered wrong when they hang on a man like a curtain on a cornice. Look for the "golden mean";
• It is unacceptable when the pockets on the pants are very puffy;
• Classic trousers in length should barely cover the heel of a man. That is, when he stands straight, the heel of his boot should be visible. At the same time, it is necessary that the trousers “walk” exactly along the man’s leg and do not form “accordions” from several folds at the bottom. Also, when walking, socks should not be visible;
• When buying pants, you need to take into account the features of the figure. For a tall and thin man, it is better to opt for a model with cuffs and without arrows. But for undersized representatives of the stronger sex, on the contrary, it is better to buy pants without cuffs and with clearly defined arrows. It is advisable for overweight men to opt for fairly wide trousers, which should not have arrows.

And, of course, when wearing classic trousers, one should not forget that, unlike jeans, they oblige a man to have appropriate shoes and a “top”. With them it is already unacceptable to wear a T-shirt, or a “fantasy” pullover. And of course - trousers should always be clean and well ironed.

To determine the ideal sleeve length, spread your fingers apart and note the dimple at the base of your thumb. The buttoned cuff of the shirt should reach the beginning of this depression, that is, it should be located 1-2 cm below the narrowest part of the wrist. The width of the cuff also matters: there should be a space between the body and the fabric equal to the width of one or two fingers.

Shirt bottom hem length

The correct length of the shirt is easy to determine: its edge, shortened on the side, should hide the belt. A shirt, the shelves of which completely hide the zipper on the trousers, is considered too long - it is difficult to tuck it neatly, and during movement the fabric will continually go astray.

A large assortment of shirts for any figure is presented in the men's clothing store.

Jacket sleeve length

The sleeve of the jacket should leave the cuff of the shirt open by 1-2 cm

The style of the jacket varies, but one thing remains the same - this is the length of the sleeve. Shirt cuffs should peek out from under the jacket by 1-2 cm. If they are open more, then it seems that you are wearing a suit that has been preserved from the time of the school graduation. If the sleeves of the shirt are completely hidden, the jacket will seem too big for you.

Jacket bottom hem length

The classic jacket should cover the buttocks

The rule for choosing a jacket is: the slots should completely cover the buttocks or be 2–3 cm shorter. But the main thing in choosing a jacket is to respect the proportions of the figure. For example, for tall men, a classic cut is acceptable, while men of small stature should take a closer look at shortened models.

The universal length of the jacket is calculated by the formula: the bottom edge bisects the distance from the collar to the floor.

Length trousers

At the back, classic trousers should be 1 cm higher than the heel, and form one fold in front. To achieve this effect, the bottom of the trousers is sewn at an angle (longer at the back), you can evaluate this even before trying it on.

Modern cropped trousers only slightly cover the boots, fully showing the lacing. It looks very stylish, but in this case, the trousers should be in a skinny silhouette.

coat length

It does not hinder movement and looks good on a man of any height.

Shortened models (to the middle of the thigh and above) are suitable for active young people of medium or small stature. Please note: the coat must necessarily hide the jacket.

A long coat looks good on stately tall men. However, this style may be inconvenient for car owners.

coat sleeve length

The sleeve of the coat should hide the cuff of the shirt.

Polo shirt length

The polo shirt should cover the trouser pockets by 1–2 cm

And out, and tucked into trousers. As you understand, it is especially important to choose the right length in the first case. An ideal shirt should slightly cover the pockets of your trousers, but no more than 1–2 cm.

Sweater length

The sweater should not be too long.

If you want to look elegant, the sweater should end at the level of the belt. Sleeves should cover the wrists, not reach the middle of the palm. Remember: not to turn you into Bigfoot.

Tie length

The end of the tie should be at the level of the belt buckle

Too short or too long not respectable, but comical image. The correct length means that the end of the tie should be at the level of the belt buckle.

When buying an accessory, be sure to tie it in your usual way. If you are tall, then a standard tie length may not suit you, so you should give preference to elongated models or reconsider the way you tie a knot.

Height of socks

The correct length of socks is determined empirically

To determine, do a little test: sit on a chair and cross your legs. If a strip of skin is not exposed between the sock and the trousers, then everything is fine. If the shin area is visible, then you need to choose a different style of socks or use a win-win option - men's golfs.

Today, every woman has pants in her wardrobe. Properly selected size of them can favorably emphasize the figure and legs of the owner. An error of just a couple of centimeters can not only visually shorten the legs, but also add a few extra pounds.

How to choose trousers?

In order to look not only beautiful in new clothes, but also feel comfortable, you need to choose the right size. For some girls with a non-standard figure, it can be difficult to find trousers or jeans of the right length. They have to adjust the purchased item to fit their height.

In order to choose the right length, you need to know some points. First of all, it is worth remembering that it directly depends on the chosen shoes.

Wide fit

The most common model of women's wide trousers is flared. It can be from the knee or hip. The problem with choosing the length of such a model is that it should be different for shoes with heels and low heels.

Properly selected length of wide trousers under the heel - it should be practically invisible. In this case, the toe of the shoe remains open. Another correct option is when the bottom edge of the pants is 2-2.5 centimeters from the floor. In order not to look ridiculous, you need to remember that they should not completely open or close the entire foot.

The correct trouser leg in shoes without heels should practically cover the foot and at the same time not reach the ground. If the trouser leg is too short, the foot will be open, and busting a few centimeters will lead to dragging the trousers on the ground.

Another type of wide-cut pants is the palazzo model.

It is more like a skirt. In this model, the legs are very wide and literally merge with each other. For the palazzo, light, flying summer fabrics are used. Pants-skirts fly apart and bounce while walking. Therefore, the correct length for such a model is 1-1.5 centimeters from the floor.

Straight classic model

Classic straight pants have the same width throughout the product. For girls who prefer shoes with heels, you need to know these rules. If the legs are too long, they will stray into an accordion in the heel area. If the pants ends above the heel, then it will give the impression that the thing is small. Proper classic trousers with a heel, according to etiquette, cover part of the heel, while the heel remains open.

It's good for low-heel shoe lovers to know that those extra inches will lead to you stepping on your own pants. The lack of a few centimeters, as in the case of heels, will emphasize that the thing is small. Ideally, if the leg ends at the level of the foot and the heel is open.

Cropped legs

Cropped pants lovers need to know that, despite the seeming simplicity of choosing the length, there are some points to consider. Girls who wear heels should remember that the trouser leg can be shortened by 5-10 centimeters. If the pants end in the middle of the calf, then you should not wear them with such shoes. In this case, it is better to put on ballet flats.

If the length of the cropped trousers is large, then they will look like regular straight ones. For the perfect look, pants should end at or slightly above the ankle. Those who are accustomed to low-cut shoes should choose cropped trousers so that they end a little above the ankle.

Full length tapered trousers

The length of the legs on skinny women's trousers should be such that part of the ankle remains open. It is wrong if the pants fit the heel or gather into an accordion.

If you put on a boot, then the trouser leg needs to be tucked in a little. Skinny pants will look good if there is a small gap between them and the shoes.

Finished edge

It is almost impossible to choose the wrong length of a product with a finished edge. Most often, cuffs, elastic bands or ties are used for decoration.

These pants always look "correct". The only condition is that they cannot be tucked into shoes.

skinny

Soft elastic fabrics are used for sewing skinny.

The finished product is well stretched and tightly fits the figure, while an accordion is not formed.

As a rule, the following materials are used:

• Soft skin;
• Denim;
• Stretch;
• Lycra.

Tight skinny pants are sewn in various colors, but without a pattern. Sometimes there are models with pockets on the buttocks, but more often they resemble leggings.

Skinnies are usually worn with boots or high boots. At the same time, their length does not really matter, since they are very narrow and are tucked into shoes. When combined with open shoes, skinny shoes should end a little above the ankle.

In order not to look ridiculous in a new thing, you need to know how to correctly determine the length of the legs. It differs significantly depending on the chosen style of trousers and on the type of shoes.

When fitting pants, you need to take into account that some fabrics have such a property as shrinkage. Information about the composition of the fabric of the product contains the manufacturer's label. If the material is prone to shrinkage, then before the excess length of the fabric is cut off, the trousers are washed in water at the temperature recommended by the manufacturer.

Some girls and women can boast of a small foot. Some have only 36 shoe sizes. At the same time, problems arise with the choice of the length of the legs, especially the wide cut.

home » strengthening » The correct length of women's trousers is slightly tapered at the bottom. The correct length of jeans: is it worth bothering